Tip: You can use filters for better results
What are projects?
Each ticket in your Work place belongs to one project, whereas you are allowed to create as many projects as required to display and structure your delivery. Projects can reflect contracts with different customers to split tickets by category or other features. That depends on your preferences and use cases. Nonetheless, splitting tickets by customer gives you the best way to analyze KPIs and keep Service Level Agreements in focus.
How to create & edit projects
- Inside the Admin panel go to Projects and More -> Projects
- Click the plus button right next to the search bar to add a new project.
- Fill in or edit the following tabs: Basic, Data security.
1. Basic tab
- Decide if your new or existing project should be set to active in the system.
- Insert a name for your new project. The name of existing projects cannot be changed afterward.
- Select a workflow from the drop-down that you want to use for your project.
By default, you can choose between Basic I and Basic II.
Basic I: Default ticket statuses
Basic II: Default ticket statuses + an additional report/validation step. - Select a Ticket source for your new or existing project.
By default, you can choose between Manual & Interface and Interface only
Interface + Manual: Tickets can be created inside the Work Place and an external interface for having tickets delivered into the system can also be used.
Interface only: Tickets can only be created by an external interface. - Select if your new or existing project should consider a skill-based selection of engineers.
- Select if the Parts tab should be available for your new or existing project.
- Select if tickets for this project are not allowed to violate the LSDT.
If the LSDT violations not allowed toggle is activated it means that tickets with expired Latest Service delivery times can’t be scheduled by dispatchers. - Select if ticket durations should be overwritten based on Ticket Duration settings.
- Select if follow-up tickets should automatically be assigned to the same engineer.
If this toggle is enabled, when a ticket is created and has the same CNE Parent as a previously scheduled ticket, it is considered as a follow-up ticket for the same case and the same engineer will be automatically assigned and locked to it.
Dependent on if ticket durations are configured either the default ticket duration is used or not used:
- The overwrite ticket duration applies on newly manually created tickets with ticket duration slider or interface tickets
- The overwrite ticket duration applies on tickets where configuring ticket durations is possible inside the ticket creation form or interface tickets
- Therefore it may not be necessary to switch the toggle on, if you do not have the ticket duration slider inside the ticket creation form
- If no ticket duration is configured the default ticket duration is 60 minutes
- If ticket duration is configured the chosen ticket duration will be used as default for newly manually created tickets or interface tickets
- If user creates tickets and ticket durations are configured and “overwrite” is used, the default value will be overwritten
- If user creates tickets and ticket durations are configured and “overwrite” is not used, the default value will not be overwritten and accepted instead
- Users can edit the ticket duration in the Ticket Details anytime
9. Click Save.
2. (Optional) Data security tab
The anonymization functionality allows you to overwrite certain data fields inside Fieldcode work place after the retention days have passed to give you the option to comply with GDPR and data security regulations.
The blind text box can be left blank if you do not want to think about a word or phrase and it will still show no text.
- Select if you want to enable data anonymization for this project by turning the toggle right.
- Insert a number of days in the retention days window if you want to set an offset of days until resolved tickets should get anonymized.
- Select the fields you want to anonymize by toggling the items you want to anonymize to the right.
Let’s say you want to anonymize the Affected person’s company and the Affected person’s primary phone number.
What you would do is toggle those two toggles to the right and insert a blind text in the right blind text box with a text that should be displayed instead (e.g. PRIVATE).
The blind text box can be left blank if you do not want to think about a word or phrase and it will still show no text.
3. (Optional) Calllog settings tab
(Optional) Enable Strike Count
The strike count assists you to apply business conformities into the system and perfectly assists dispatchers in their daily job.
The strike alert is visible for the dispatcher while scheduling tickets and while clicking Callback Required and while reaching the limit.
- Toggle the switch to the right.
- Insert the number of strikes (Default: 3) that should be applied for this project.
- (Optional) Set a message that should appear for the dispatcher when the count reaches the limit.
- (Optional) Translate this message to other languages.
- Click Save.
(Optional) Enable Waiting Duration
The Waiting Duration is visible for the dispatcher while scheduling tickets and while clicking Enduser not reached.
- Toggle the switch to the right.
- Insert a duration. You can set minutes, hours, and even days.
- Click Save.
4. (Optional) Value Sets tab
If your company uses custom values you have the option to activate and deactivate them from the Projects tab. This can also be done directly in the Value Sets and the functionality behaves the same.
- Activate or deactivate values to your specific project needs by flipping the Active toggle accordingly.
- Click Save.
5. (Optional) Parts tab
The Parts tab gives you the option to automatically adjust the shipment type based on delivery location, enter an optional storage time, and the possibility that the Parts Estimated Time of Arrival should be taken preferably from the tracking data of the logistic company.
- (Optional) – Enable or disable the Automatically adjust shipment type based on delivery location switch.
If you enable the Automatically adjust shipment type based on delivery location switch the system will compare the ticket’s on-site location with the part(s) delivery location and automatically determine and set the shipment type. The shipment type is selected when adding a part and selecting something in the delivered to field. - (Optional) – Enter or don’t enter a storage time in the storage time (in days) field. The system calculates with calendar days. If you don’t enter any number, storage time will not be utilized from the system. If you enter a number in the storage time field the count of the storage time will start outgoing from the Parts ETA. The parts storage time indicates how long a part is available for pick-up. You can enter a permanent storage interval by implementing it directly on the project page (global setting), or a temporary storage interval when entering the parts shipping details on the parts form (temporary setting).
- (Optional) – Enable or disable the Parts ETA should be taken from tracking data switch. If you enable the Parts ETA should be taken from tracking data switch the system will prefer the usage of tracking data from the logistics partner for calculating the Parts ETA, which may result in more accurate and more real-time updates in estimating, when a part will arrive, compared to the current shipping ETA. Enabling this switch may result in improved optimizing and scheduling suggestions, as the system can utilize an additional data point.
Technical background: If enabled, tracking API ETA will be stronger than the current shipping ETA and this tracking API ETA will be used as part (item) ETA in scheduling and optimizing.
6. (Optional) SMTP Email Settings tab
The SMTP Email Settings tab gives you the option to configure a different project-based email-sending address. When you send out emails to your customers you can for example send emails on behalf of your company. Which emails are sent out to customers can be for example configured inside Automated Actions.
-
Decide if you directly want to activate the project-based SMTP email configuration.
-
Enter the user name that you use for logging in into the SMTP Account.
-
Enter the password that you use for logging in into the SMTP Account.
-
Enter the from email address. This email address will be later visible when sending out emails to customers for this project.
-
Enter the from display name. This display name will be later visible when sending out emails to customers for this project.
-
Enter the SMTP host address. On the left, you can see what it might look like. You can find the SMTP host address for example by checking with your mail provider.
-
Enter the SMTP Port. On the left, you can see what it might look like. You can find the SMTP host address for example by checking with your mail provider.